HandTop HT3200-UV K Series, Installation Instruction

Page: 73 / 113

72
Select “Bidirectional offset” in the drop-down menu and print.
Observe the calibration print through a magnifying glass and write down
the aligned parameters.
Repeat step 1 / 2 / 3 at corresponding speed for modifying bidirectional
offset till Bidirectional offset is ok.
Different vehicle velocities correspond to different bidirectional calibration
parameters, please calibrate separately.
How to observe the testing picture of Bidirectional offset?
The status of +3
is the best.
Plus 3 to the value of
bidirectional offset of
speed 1.0x.18+3=21.
6.5.5 Stepping calibration
Select “Stepping calibration” in the drop-down menu and print.
Observe the calibration print through a magnifying glass and write down the
aligned parameters.
Modify the step bias parameter in the corresponding
position.
Repeat step1/2/3 till the stepping calibration is ok.