HandTop HT3200-UV K Series, Installation Instruction

Page: 55 / 113

54
1. Ink supply system status: The green light means normal
status; yellow light means abnormal status. For different
colors, the status information will be shown.
2. Reset button: Reset function for external device control
board, equal as reboot the external device control
board. It will erase the warning information. Including
ink supply, air supply and light curtain reset.
1. Disable the solenoid valve of subtank
2. Time setting of priming ink
3. Prime selection
5.2.5 GUI control---LED ON/OFF setting
The adjusting password of the shutter (LED light source) opening and closing position
is
ua13
. After input, click verification to enable the fine tuning setting function.
The 8 parameters on the left are fine-tuning parameters in millimeters. The
parameters are described in detail as follows:
Left light on position adjustment (mm) of the left light when the car moves to the
right and left light off position adjustment when the car moves to the right (mm) :
According to the figure below, the top right arrow indicates that the car is moving to
the right, and the black solid rectangle on the left side of the car indicates the left
curing light. The vertical line i1 represents the position where the UV curing lamp is
turned on, while the vertical line i2 represents the position where the UV curing lamp