HandTop HT3200-UV K Series, Installation Instruction

Page: 25 / 113

24
3. Remove the carriage locking parts on the right side of the beam, see the picture
below
4.2 Equipment level adjustment
Tools: Level
（
Precision range 0.02mm/m
）
, monkey wrench
When adjusting the level on the right/left side, the level should face the
same direction.
Level position diagram
1. There are 6 main supporting foot cups on the machine body. First, raise up all the
foot cups, and lower down the 4 foot cups in the corner of the frame, make sure
they touch the ground. Jack up the foot cups until the yellow base leave the
ground (5mm height would be enough)
2. Place the level on E position, check the height difference of left/right side