HandTop HT3200-UV K Series, Installation Instruction

Page: 102 / 113

101
Fuzzy printing quality
Check the print head height see if it is too high,
normally should be 2mm from the nozzle to
substrate surface.
Clean the print head surface, redo calibration
Printing color darker or lighter.
If the brightness is not
enough(or normally called
noise), when printing vibrant,
the color transition part
showing missing line or
regular bending.
Adjust colors in the job editor, if the color is darker,
lower the overall ink limit 10-30. If the color is lighter,
raise the overall ink limit 10-30.
Perform offset calibration
Check the print head vertical calibration
Change the spreading type: Switch between FX-2 and
J-STOCH, compare the performance.
Printed border lines are not
straight
Re-do the calibration
Perform the horizontal nozzle registration
Offset calibration
5.Tools and attribute