HandEra 330 User Manual Download

Page: 52 / 248

3-18

HandEra 330 User Guide

CardPro Preferences

Figure 3-20. CardPro Preferences

Hackmaster Present Warning

– If enabled, warns you if CardPro

detects Hackmaster is installed. It is recommended that this
option remain enabled.

Hide Built-In App RAM Databases

– If enabled, CardPro does not

display the databases associated with the built-in apps, such as
the Address Book or Date Book.

Low Battery Warning

– If enabled, CardPro warns you if the

battery level is too low to safely perform CardPro copy
operations.

Prompt on Overwrites

– If enabled, CardPro warns you before

overwriting a file.

Enable Advanced Sorting Options

– If enabled, files can be sorted

by size, creator, type or name.

Summary of Contents for 330

























































































































































































































































Search results

Summary of Contents for 330

Reviews:

Related manuals for 330

Brands by name

Popular brands

HandEra 330, User Manual

Search results

Summary of Contents for 330

Reviews:

Related manuals for 330

Brands by name

Popular brands