manualshive.com logo in svg

HandEra 330, User Manual

Share
Download
HandEra 330 User Manual Download Page 17

HandEra 330 User Guide 

1-7 

 

Note:

 

If you are using Microsoft Outlook or other organizer 

software instead of the Palm Desktop software, you are still 
required to install HotSync Manager, conduit software, and 
other features of Palm Desktop software. 

Installing the Palm Desktop Software 

1. 

Turn on your desktop computer. 

2. 

Exit any open programs, including those that run automatically 
at startup such as Microsoft Office, virus-scanning software, 
utilities, or TSR (terminate-and-stay-resident) applications. 

3. 

Insert the Palm Desktop CD-ROM into the CD-ROM drive. 

 

Note:

 

If installation does not begin, click the Windows Start 

button, select Run, enter D:\autorun.exe, and then click OK. If 
necessary, replace “D:” with the drive letter assigned to your 
CD-ROM drive. Follow any on-screen instructions for 
installing the Palm Desktop software. 

Summary of Contents for 330

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands