Hamworthy STRATTON MK3 Series, Installation, Commissioning And Servicing Instructions

Page: 67 / 154

06.02.2023 67 / 154
STRATTON MK3 - Installation, Use and Maintenance
Diagram: MK3-3
page 5 / 6
F. SPECIFIC START-UP PROCEDURE
"
Correctly install and connect the electrical connections.
"
Make the settings below in "specialist" mode:
Line No. Value
• Time and date menu
Set the time Hour / minute (1) HH.MM
Set the date Day / month (2) DD.MM
Set the year Year (3) YYYY
• Configuration menu
Configure the secondary flow sensor BX2 sensor input (5931) B10 line output sensor
Start up heating circuit 1 Heating circuit 1 (5710) Start
Start up heating circuit 2 Heating circuit 2 (5715) Start
Start up heating circuit 3 Heating circuit 3 (5721) Start
Configure the alarm output Relay output QX1 (5890) Alarm circuit K10
Configure the DHW tank pump output Relay output QX2 (5891) DHW pump Q3
Configure the direct circuit pump Q2 Relay output QX3 (5892) Pump CC1 Q2
Configure the extension modules
Extension module function 1 (6020) Heating circuit 2
Extension module function 2 (6021) Heating circuit 3
Save the sensors so that they are taken
into account by the system
Save sensor (6200) Yes (switches back to
no automatically)
OK
OK
Short press
Press for 3 seconds End user Start-up
Specialist OEM
IMPORTANT: configure the switches on the AGU 2.550 extension modules.