Hamworthy STRATTON MK3 Series, Installation, Commissioning And Servicing Instructions

Page: 7 / 154

06.02.2023 7 / 154
STRATTON MK3 - Installation, Use and Maintenance
WARNING: Presence of hot surfaces that can cause burns.
BSEN.12831:2017 Heating Systems in buildings: Method for calculation of
the design heat load.
BSEN.13831 Specification for: Expansion vessels using an internal
diaphragm, for sealed hot water heating systems.
BSEN.14336:2004 Heating Systems in buildings: Installation and
commissioning of water based heating systems.
IGEM/UP/1 Soundness testing and purging of industrial and commercial gas
installation
IGEM/UP/2 Gas installation pipework, boosters and compressors on
industrial and commercial premises.
IGEM/UP/10 Installation of gas appliances in industrial and commercial
premises.
ICOM Water treatment and conditioning of commercial heating systems
guide.
Where reference is made throughout these instructions I.S.813:2002
“Domestic Gas Installations” reference should also be made to I.S.820:2000
“Non-Domestic Gas Installations” as applicable.
WARNING:
If you smell gas:
• Do not use any naked flames, smoke or activate any contacts or
electric switches.
• Switch off the gas supply.
• Ventilate the area.
• Look for the leak and correct it.
WARNING:
If any smoke is released:
• Switch off the boiler.
• Ventilate the premises.
• Look for the leak and correct it.
WARNING:
This boiler's earth continuity is provided by link cables (green/yellow)
and specific fastenings. During any disassembly operations, make
sure that the cables in question are reconnected; you MUST also
reuse the original fastenings.