Hamworthy STRATTON MK3 Series, Installation, Commissioning And Servicing Instructions

Page: 62 / 154

62 / 154
STRATTON MK3 - Installation, Use and Maintenance
00U07428680-C
Diagram: MK3-2
page 5 / 5
Line No. Value
• Configuration menu
Start up heating circuit 1 Heating circuit 1 (5710) Start
Configure the alarm output Relay output QX1 (5890) Alarm output K10
Configure the DHW pump output Relay output QX2 (5891) DHW pump Q3
Configure the secondary flow pump BX2 sensor input (5931) B10 line output sensor
Configure the expansion module Extension module function 1 (6020) Heating circuit 1
Configure the input for remotely switching the heating mode
Module 1 H2 input function (6046) Switching of heating circuit
operation1
Save the sensors so that they are taken
into account by the system
Save sensor (6200) Yes (switches back to
no automatically)
• Heating circuit 1 menu
Adjust the comfort setting Comfort setting temperature (710) ---°C
Adjust the heating curve slope Curve slope (720/1020/1320) ---
Switching to comfort mode with H2
contact
Regime switching (900) Comfort
Switch the heating regime to permanent comfort
• Domestic hot water
menu
Adjust the DHW setpoint Comfort setting (1610) ---°C
Activate the DHW mode
Refer to the “ELECTRICAL VALIDATION” chapter for the regulator input/output tests
Refer to the "OPTIMISATION" chapter for configuring the time slots for the heating and DHW circuits
as well as for programming the anti-legionella cycles.