Hammerhead HG2200AT, Operator'S Manual

Page: 91 / 146

HG2200/HG2200AT Operator’s Manual
Track Tethered Remote Control
90 - Systems and Equipment
Track Tethered Remote Control
The track tethered controller should be used if the wireless remote controller is damaged or cannot be
used.
To connect:
1. Remove electrical connections from main
control valve (1, 2).
2. Install cable from track tethered remote control
labeled “left track” into main control valve (2).
3. Install cable from track tethered remote control
labeled “right track” into main control valve (1).
4. Connect red clamp to positive battery terminal.
5. Connect black, ground clamp to machine
frame away from battery.
6. Operate tracks using track tethered remote control. See “Track Tethered Remote Control” on page 40.
Auxiliary Work Light
The auxiliary work light can be used if additional
light is needed at the jobsite. The base is magnetic
and enables the light to be moved as needed.
1. Remove light from storage position (shown).
IMPORTANT:
• The track tethered remote control is intended for emergency use only. Do not use for normal
operation.
• Connecting the track tethered remote control overrides the wireless remote controller function.
IMPORTANT: Ensure paint is removed
and surface area is clean when
connecting clamp.
1 2
j64om066w.eps
j64om069w.eps