Hammerhead HG2200AT, Operator'S Manual

Page: 61 / 146

HG2200/HG2200AT Operator’s Manual
Check Supplies and Prepare Equipment
60 - Prepare
Requirements
Installation Pit (1)
• Pit dimensions depend on pipe depth and product being installed.
• Must be in line with existing pipe.
• Sloped back end aids new product installation. Consider new product bend radius.
Bursting Pit (2)
• Must accommodate the length and angle of the downhole unit.
Check Supplies and Prepare Equipment
Check Supplies
• marking flags or paint
• fuel
• hydraulic oil
• keys
• cutting heads, clevis
• barrier cones and tape
• Wire cable (See “Wire Cable” on page 92.)
• personal protective equipment, such as hard hat and safety glasses
• notepad and pencil
NOTICE: Follow U.S. Department of Labor regulations on excavating and trenching (Part 1926, Subpart
P) and other similar regulations.
j57om021w.eps