Hammerhead HG2200AT, Operator'S Manual

Page: 89 / 146

HG2200/HG2200AT Operator’s Manual
Wireless Remote Controller
88 - Systems and Equipment
Wireless Remote Controller
Before Each Use
1. Check transmitter unit battery status.
Replace batteries if necessary. See
page 127.
2. Ensure USB key (shown) is installed. This
key is a lockout feature to prevent
unauthorized use.
Operation
1. Start the remote transmitter by moving the power/start/horn switch up until communication link
indicator is steady yellow and then blinks green.
•
Clear wireless remote control light (page 4) will shine when machine is ready to operate.
• Green wireless remote control light (page 4) will shine when remote is in contact with machine.
2. Ensure wireless remote control enable switch is on. See page 31.
3. Move power/start/horn switch up again with controls in neutral until horn sounds.
Equipment can be operated by remote control. Stay away.
270-6037
To help avoid injury:
• Keep unit in sight at all times when using wireless remote controller.
• Keep a safe distance away from unit when operating wireless remote controller.
• Ensure bystanders are not near the area the unit will be driven.
• Remove strap from around neck when using wireless controller near moving parts. Place wireless
controller in storage box after use. Take care not to store with neck strap on top of switches.
EMERGENCY STOP: Press engine stop on wireless remote or machine.
IMPORTANT: Wireless controller will shut down after one minute of inactivity. Move power/start/
horn switch up to restart.