Hammerhead HG2200AT, Operator'S Manual

Page: 39 / 146

HG2200/HG2200AT Operator’s Manual
Wireless Remote Controller
38 - Controls
3. Track drive To move the right track
forward, move the right
joystick up.
To move the right track
backward, move the right
joystick down.
To move the left track
forward, move the left joystick
up.
To move the left track
backward, move the left
joystick down.
To pivot the machine, move
both joysticks.
To select track drive speed, see
“Speed selection switch” on page 35.
IMPORTANT: High speed should be
used for travel only.
4. Stabilizers To raise right stabilizer, move
right joystick up.
To lower right stabilizer, move
right joystick down.
To raise left stabilizer, move
left joystick up.
To lower left stabilizer, move
left joystick down.
IMPORTANT: Lower left and right
stabilizers to the ground together,
then adjust individually.
5. Mast/Winch set-up To raise the mast, move the
left joystick up.
To lower the mast, move the
left joystick down.
To rotate the mast clockwise,
move the left joystick to the
right.
To rotate the mast
counterclockwise, move the
left joystick to the left.
To push cable out, move the
right joystick up.
To pull cable in, move the
right joystick down.
To select speed, see “Speed selection
switch” on page 35.
IMPORTANT:
• When using cable to set the mast
depth, speed should be set to low.
• When stowing mast, ensure cable
is extended at least 1’ (30.5 cm)
beyond lower sheave to prevent
damage to the boom or cable.
Item Description Notes
c00ic 768 h . eps
c00ic 769 h . eps
c00ic 77 0h . eps