Hammerhead HG2200AT, Operator'S Manual

Page: 119 / 146

HG2200/HG2200AT Operator’s Manual
100 Hour
118 - Service
100 Hour
Change Engine Oil and Filter
Change engine oil and filter every 100 hours.
To change:
1. While oil is warm, remove drain plug (3). Drain
oil and replace plug.
2. Remove filter (1) and replace with new filter
each time oil is changed.
3. Add DEO at fill (2) until oil level is at highest
capacity on dipstick.
Check Fan Belt
Check alternator fan belt tension every 100 hours.
1. Apply pressure to fan belt (2) between pulleys.
Belt should move between 0.28-0.35” (7-9
mm) when pressed.
2. If the belt is outside of normal tension adjust
alternator arm (1) until belt is within normal
limits.
3. Replace fan belt if damaged.
Task Notes
Change engine oil and filter DEO
Check fan belt
Check battery
j64om043w.eps
2
3
1
j64om044w.eps
1
2