Hammerhead HG2200AT, Operator'S Manual

Page: 30 / 146

HG2200/HG2200AT Operator’s Manual
Winch Controls
Controls - 29
Item Description Notes
1. Manual throttle To decrease engine speed,
press center button and push
knob in.
To increase engine speed,
press center button and pull
knob out.
To increase engine speed
with fine adjustments, turn
knob counterclockwise.
To decrease engine speed
with fine adjustments, turn
knob clockwise.
To lock throttle into place, turn
base ring clockwise.
To unlock throttle settings,
turn base ring
counterclockwise.
IMPORTANT: Pushing throttle
adjustment control all the way in does
not stop the engine.
2. Electronic throttle
switch
To run engine at full throttle,
press top.
To run engine at low throttle,
press bottom.
IMPORTANT: Throttle is to be run at
maximum speed during operation of
winch. Cable pullback speed is
adjusted with the cable speed
adjustment control. See “Cable speed
control” on page 33.
3. Hydraulic fluid warm-up
switch
To start hydraulic fluid warm-
up cycle, press top.
To interrupt cycle, press
bottom.
Unless interrupted, switch will
automatically shut off when hydraulic
fluid is warmed to operating
temperature.
c00ic240w.eps
c00ic029w.eps
c00ic259w.eps