HamGadgets MasterKeyer MK-1 User Manual Download Page 44 | Manualshive

Page: 44 / 50

background image

Firmware Version 1.21

2/2/2010

43

include corrections to problems that have been discovered (“bug fixes”), new features or
improved functionality.  New firmware files can be downloaded from the
HamGadgets.com web site as they become available.

The firmware update process is simple and takes only a few minutes.  After downloading
the update file, copy it to the root directory of a FAT formatted USB FLASH memory
drive.  Disconnect the PC from the USB B connector, if you have it connected.  With
power to the MasterKeyer MK-1 switched off, insert the FLASH drive into the USB host
(A) connector on the rear panel.  Hold down function/memory buttons 1 and 6 and switch
the power on.  After a short self-test, you will see a distinctive “chase” pattern in which
the buttons will sequentially light up green.  As soon as this pattern begins, you can
release the buttons while the firmware load proceeds.

When the program load is complete, the keyer will reset and function as normal.  It is
safe to leave the USB FLASH memory drive inserted; a firmware update will only be
performed if the first and last buttons are held down while power is switched on.

Suggestions & Feedback

Everyone will, at some point, think, “Gee, this is nice, but I wish it would do this…”
Well, don’t keep it to yourself.  The MK-1 is capable of doing things we haven’t even
thought of yet – and some we have thought of, but haven’t perfected yet.  And, as with
pretty much any device from a toaster oven to a space shuttle, there may be the
occasional bug or feature that doesn’t work quite exactly as it should.

If you find one of these problems, or have a great idea for that perfect feature or change,
don’t keep it to yourself.  Let me know how you think this keyer can be improved.  I
can’t promise you will see your idea adopted, but if it is something that the majority of
users will want, or it makes sense to include it for a significant minority, it may well
appear I the next firmware update.  You can always send your feedback, comments,
suggestions and bug reports via email to [email protected].

«
...
42
43
44
45
46
...
»

Summary of Contents for MasterKeyer MK-1



















































Reviews:

No comments

Related manuals for MasterKeyer MK-1

Brand: Thinkpower Pages: 30

FREQROL-Z200-UL

Brand: Mitsubishi Pages: 120

Brand: E-Lektron Pages: 7

Brand: Coretec Pages: 38

Brand: CYP Pages: 60

Brand: Goodwe Pages: 50

Brand: 3onedata Pages: 7

Brand: Racal Instruments Pages: 12

Brand: Vitek Pages: 32

Brand: AceWav Pages: 2

Giga-MiniMC 856-10730-RX

Brand: B&B Electronics Pages: 15

Brand: ENC Pages: 57

COMBIVERT F4-S Series

Brand: KEB Pages: 30

Brand: M-system Pages: 4

Brand: Audio Nemesis Pages: 10

QM1003-0.5-18-2

Brand: Quonset Microwave Pages: 100

Brand: Actox Pages: 36

Brand: MAER IDROPULITRICI Pages: 48

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands