Firmware Version 1.21
2/2/2010
14
Click the “Session” category. Type a name
for this connection – “MasterKeyer” is a
good choice. Click Save.
Now you can double-click the session name,
or select it and click Open.
Type a question mark in the terminal window; you should see the MasterKeyer command
menu. You can type a slash and a command here; in this example, I typed /V to see the
firmware version.
Setting up Hyperterminal
If you prefer, you can use Windows Hyperterminal to communicate with your MK-1.
Hyperterminal has some limitations and bugs; I recommend using something else, but
here is how to set it up if you must.
