20
Plane6 Software – Summary of Main Screens
Step 1: Set Up Plane6
Enter the horizontal and vertical dimension of
the plate and the border width from the edge
of the plate to the measuring line. Then select
the number of points you want to measure for
the horizontal, vertical and diagonal lines.
Next select the plate grade enter the plate
serial number and top and bottom temperature
(if measured).
Figure 22 - Plane6 - Step 1 Dimensions & Tolerances
Step 2: Data Collection
This is the main data recording screen. It
features a 2-axis, real-time data display, the
layout for the plate, the measurement points
and distances. It guides the user through the
sequence of data taking for the 8 line
segments in the Moody Method for
calibrating surface plates.
Figure 23 - Plane6 - Step 2: Data Collection
Summary of Contents for L-703SP
Page 1: ......
Page 54: ...50 An example on how to do the Math to get the exact flatness values...
Page 55: ...51 Plane6 Sample Report...