19
Each project is saved into a dedicated folder in the
Projects folder that you specified in the New File
dialog box.
File Structure
In each Plane6 folder, there are 2 data files.
•
The
***.p6z
file contains all the data taken
during the sesssion.
•
The *.
p6z
.backup* are backup files recorded
during each session you save data.
The data format for these files is XML but it can
exported to a CSV file by clicking on the Tools
menu. The file can be opened in Notepad and
viewed there. All data is recorded in microns.
Divide all values by 1000 to get millimeters.
Warning! Do not delete or modify the P6z
files in these folders as Plane6 will be unable
to open the project.
Converting Raw Data Values in CSV files to
Inches or Millimeters
•
To get inches for dimensions and center
values: inches = (micron value/1000) / 25.4
•
To get in/ft for angular values: in/ft =
mm/mm value *12.
•
To get mm’s for dimensions and center
values: mm=micron value/1000
•
To get mm/m for angular value: mm/m =
mm/mm value*1000
Restoring File Backups
To restore older version backup:
1)
Rename original file to something else,
or delete it
2)
Rename backup by removing the
“.backupn” part. In the example, change
36x48 Plate sn-13486.p6z.backup1 to
36x48 Plate sn-13486.p6z
Summary of Contents for L-703SP
Page 1: ......
Page 54: ...50 An example on how to do the Math to get the exact flatness values...
Page 55: ...51 Plane6 Sample Report...
