HAMAR LASER L-703SP, Manual

Page: 30 / 57

26
Targets - Setup Procedure
When you buy a new system and laptop from HLI,
the target setup is already pre-configured into
Plane 6. However, if you are installing Plane6 on
your laptop, then you must follow this procedure
to set up the target.
1. Click the Target button.
2. Click Add New Target to specify and set up a
target type and computer interface if needed.
There will be dropdown list of target types
supported by Plane6. Pick the T-1297 target
type by clicking on it.
3. Select Target Type – T-1297 Targets 3-Axis
Mode
To choose the T-1297 targets, select the target
number with “ 3-Axis Mode ”, but not “ Scan
Mode ”.
Note - the Scan Mode will automatically be added
as a target type for each T-1297 selected. Scan
Mode is needed with the L-702SP or L-730/740
Series Lasers for a different application.