HYDROK – Assembly
Risk of injury!
Contamination of the mechanism can influ-
ence/reduce the stroke, thus the clamping
force is reduced and thus, the workpiece is not
properly tightened and can be thrown out.
Clean the product regularly [see chapter
»Maintenance and service«].
Risk of injury!
If the clamping pressure is too low clamped
workpiece may be thrown out.
If the clamping pressure is too high severe
damages of the components of the clamping
device may occur the throwing out of the work-
piece.
Before operation set the operation pressure
back to operation level.
The operating pressure should be checked
and adjusted regularly!
The dimension of the workpieces should be
checked regularly [clamping-ø]!
Transport!
For transport always use a suitable clamping
means / crane.
Make sure that a rolling / falling of the clamp-
ing device is not possible.
Order h49 7144.907-333
67
