HYDROK – Assembly
6.3 Installation
WARNING!
Danger of injury due to unintentional start-
up of the tool spindle!
Unexpected start up of the tool spindle can
cause severe injury.
Prior to switching on automatic mode close
all protective doors or hoods that are present
on the machine tool.
Unscrew all eye bolts from the clamping de-
vice and remove them from the interior of the
machine.
Only run the machine in set-up mode or jog
mode.
Always remove immediately all the tools and
wrenches from the clamping device after use.
WARNING!
Risk of injury!
By operating the clamping device without
changing parts [clamping head, segmented
clamping bushing, workpiece end-stops ...]
there is an increased risk of crushing injuries
by the stroke of the moving components of the
clamping device.
By uncontrolled discharge of the clamping
process [e.g. by incorrect installation of the en-
ergy supply or faulty programming] there is an
increased danger.
WARNING!
Risk of injury!
Bending in the working area of the machine
can cause severe head injuries!
66
Order h49 7144.907-333
