HYDROK – Safety
The following sketch is provided for graphic illustra-
tion of the forces and torques used below in the cal-
culating examples:
F
G
/[N] = workpiece mass / [kg] x 9,81 / [m/s
2
]
Fig. 1
2.10.2 First limit
[workpiece
length]
The max. unclamping length that can be machined
without the aid of steady rest or tailstock is specified
at max. 6x the clamping diameter.
2.10.3 Second limit
[workpiece
mass]
The maximum workpiece mass depends on the chuck
size and is shown in Table
1.
[Values apply for individual workpieces; separate limit
values apply for bar work]
Order h49 7144.907-333
21
