HYDROK – Assembly
6.2 Preparations
The total weight of the clamping device, consisting of
spindle flange and clamping unit, depends on the size
and can be as much as 30-40 kg.
Depending on the weight, to safely lift the clamping
device out of the package and position it in the ma-
chine it must be hooked into a crane.
WARNING!
Danger of injury due to falling components!
When mounting components can fall and
cause severe injury and material damage.
Two people are always required for this task.
Use a crane.
WARNING
Risk of injury due to stored energy!
The clamping device can be designed with disc
springs. These disc springs are under perma-
nent tension! The release of the stored energy
can cause injuries!
By loosening the corresponding screws they
have to be operated continuously alternately
to reduce the clamping pressure to a mini-
mum!
Particularly cautious approach is required!
For cleaning and maintenance disassemble
the clamping device from the machine!
Always wear personal protective equipment!
Order h49 7144.907-333
65
