HYDROK – Safety
Wrong clamping of
the work piece
WARNING!
Danger of injury due to incorrect clamping
of the work piece!
Incorrect work piece clamping may lead to the
ejection of the work piece and result in serious
injuries.
Under dimensioned [tolerance] parts can lead
to incorrect clamping!
Check the unmachined work pieces at ran-
dom on dimensional accuracy.
Too low supply pressure can lead to the reduc-
tion of clamping force!
Too high supply pressure can lead to damage
of the components of the clamping device!
Check and adjust, if necessary, the supply
pressure regularly.
Do random checks of the unmachined work
pieces on dimensional accuracy.
Missing changing
parts
WARNING!
Danger of injury due to missing changing
parts!
When operating the clamping device without
changing parts [segmented clamping bushing,
clamping heads, work piece end-stops] there is
a higher danger of crushing injuries due to the
stroke of movable components of the clamping
device.
The clamping process may not be initiated
without assembled segmented clamping
bushing and/or work piece end-stop.
Parts with sharp
edges
WARNING!
Risk of injury!
When screwing in individual components such
as for example work piece end-stops, threaded
adapters and similar devices that are equipped
with an external thread or wear caused by
burrs, there is risk of cutting.
The operation must be done only by qualified
personnel.
Wearing of gloves / [PSA] is required!
Order h49 7144.907-333
15
