HYDROK – Maintenance
8 Maintenance
Environmental
protection
Comply with the following instructions for environmen-
tal protection when performing maintenance work:
At all lubricating points where lubricant is applied by
hand, remove escaping, used, or excess grease,
and dispose of it in accordance with applicable local
regulations.
Collect used oil in suitable containers and dispose
of it in accordance with applicable local regulations.
8.1 General
Cleanliness of the appropriate end-stop as well as the
guidance diameters are conditions for reaching the
concentricity and perpendicularity tolerances. Clean
these surfaces with an appropriate cleaner.
CAUTION
Danger of injury due to improper handling
of cleaners!
Improper handling of cleaners can cause
health impairments.
Always comply with the safety data sheets
and guidelines provided by the manufacturer
of the cleaning agent for handling/using the
cleaners.
CAUTION
Danger of injury due to loss of clamping
force!
Fouling of the clamping device can cause the
clamping device to lose considerable clamping
force.
Always comply with the maintenance and
cleaning intervals specified in this manual.
In conjunction with the maintenance inter-
vals, regularly check the maintenance status
of the clamping device through clamping
force measurements.
Order h49 7144.907-333
81
