Hagie 204SP, Operator'S Manual, Page: 98 / 127

SECTION 8 –
MAINTENANCE AND STORAGE
8-21
SERVICE INTERVALS
Service Point Initial Daily/
Before
Each
Use
As
Required
50
Hrs.
100
Hrs.
250
Hrs. **
500
Hrs. **
1000
Hrs.
Check Lug Nut Torque
(Break-in) X
Check Engine Oil Level X
Check Radiator Coolant
Level X
Check Radiator Grille
Screens X
Check Engine Drive Belt X
Check A/C Compressor Belt X
Check Filter Minder
®
Level
X
Check Hydraulic Reservoir
Level X
Check Battery X
Check for Leaks Around the
Machine X
Check Windshield Washer
Fluid Level (if equipped) X
Check and Drain Primary
Fuel Filter (Water Separator) X
Check Quad Puller Tire
Pressure X
Check/Tighten Cutter Blade
Retaining Bolt X
Lubricate Quad Puller Head
Grease Zerks (4 each) X
Check Leg Mount Bolt
Torque X
Check Air Bags (visual) X
Lubricate Quad Puller Head
Bearings X
Grease Leg Lubrication
Zerks X
Replace Windshield Wiper
Blade (if equipped) X