Hagie 204SP, Operator'S Manual, Page: 42 / 127

SECTION 4 –
ENGINE AND DRIVE SYSTEMS
4-4
Quad Digital Data Selection
To adjust the contents of the quad digital
screen, press any of the first four soft keys to
display the Button Bar, then press F5 to
enable cycling through all of the display
parameters.
Single Analog Gauge
Screen (F3)
Press the F3 Button to navigate to the
Single Analog Gauge screen. The
configurable data is also accompanied by a
digital readout below.
Single Analog Data Selection
To adjust the contents of the single analog
screen, press F3 to display the Button Bar,
then press F3 again to enable cycling
through all of the display parameters.
Active Alarm Screen (F4)
Press the F4 Button to navigate to the
Active Alarm screen, which displays all
active/current alarms received by the
system.
NOTE: The alarms are displayed by the
most current. Press the F1 and F2
Buttons to scroll through the alarms.
NOTE: Active/current alarm messages are
automatically cleared from the list
when the fault is no longer received
by the Engine Monitor.
When an active/current alarm is received,
a flashing Active Fault Warning will appear
on the display describing details of the alarm.
NOTE: The alarm list is accessed by
pressing any key while an Active
Fault Warning is displayed.
Press the F3 Button to acknowledge
alarm. Alarms not yet acknowledged are
displayed with a red background. Alarms that
have been acknowledged are displayed with
a black background.
Single Analog Gauge Screen
-Typical View
Active Alarm Screen
-Typical View
Active Fault Warning
-Typical View