8-20
SECTION 8 –
MAINTENANCE AND STORAGE
Tire Pressure
•
Check tire pressure weekly.
•
Never inflate a tire more than the recom-
mended maximum air pressure.
•
Use an airline with a locking air chuck
and stand behind the tire tread while fill-
ing.
NOTE: Tire pressure will depend on type of
tire used and amount of load.
Wiper Blade
-If Equipped
Do not allow the Wiper Blade to run on a
dry windshield, as this will shorten the life of
the blade and/or cause scratching on the
windshield.
NOTE: Replace the windshield wiper blade
(39”/99 cm) as necessary.
Washing the Machine
As often as possible, thoroughly wash the
machine and apply paint to any place where
the paint is light or missing.
For replacement decals or touch-up paint
recommendations, contact your local John
Deere dealer.
CAUTION
When inflating tire, use an extension
with an in-line air gauge and air chuck.
This will allow the operator to stand clear
of a possible tire sidewall explosion
trajectory.
A/C System Receiver/Drier
(Located behind cab near the radiator -
remove radiator screens to access)
-Typical View
NOTICE
Use a sturdy stationary ladder to safely
access the wiper blade.
-Typical View
Summary of Contents for 204SP
Page 2: ...5 DASH AUTO...
Page 127: ......