Hagie 204SP, Operator'S Manual, Page: 17 / 127

2-3
SECTION 2 –
SAFETY AND PRECAUTIONS
• Perform all work in an area that is well
ventilated to carry toxic fumes and dust
away.
• Dispose of paint and solvents properly.
Avoid Heating Near Pressurized
Lines
• Avoid torching, welding, and soldering
near pressurized hydraulic lines.
Pressurized lines may accidentally burst
when heat goes beyond the immediate
flame area.
Handle Fuel Safely
• Always turn engine off and allow it to cool
before refueling.
• NEVER smoke while refueling.
• Do not fill fuel tanks completely, as fuel
may expand and run over.
• Always clean up spilled fuel with soapy
water.
• Keep a fire extinguisher nearby when
refueling.
Be Prepared
• Be prepared for an emergency. Keep a
fire extinguisher and first aid kit nearby.
• Service the fire extinguisher regularly.
Keep an accurate inventory of supplies in
the first aid kit and dispose of anything
that has expired.
Protect Against Noise
• Operating equipment safely requires the
full attention of the operator. Do not wear
radio or music headphones while
operating the machine.
• Prolonged exposure to loud noise may
result in loss of hearing. Wear suitable
hearing protection.
Battery Acid Accident
Prevention
Avoid serious injury by avoiding battery
acid contact with your body. Battery
electrolyte contains sulfuric acid that is
strong enough to eat holes in clothing and
cause blindness if splashed into eyes.
Make sure to:
• Fill batteries in a well ventilated area.
• Wear Personal Protective Equipment (PPE)
when servicing a battery.
• Avoid breathing in the fumes when recharging
with electrolyte.
• Avoid spilling or dripping electrolyte.
• When charging a battery, connect positive cable
to positive terminal and negative cable to
negative terminal. Failure to comply may result
in an explosion and/or personal injury.
If you spill on yourself:
• Flush affected area with cold water and remove
contaminated clothes and shoes immediately.
Continue to flush the area for a minimum of 15
minutes.