Hagie 204SP, Operator'S Manual, Page: 82 / 127

SECTION 8 –
MAINTENANCE AND STORAGE
8-5
Engine Oil Fill
Engine oil can be added through the
Engine Oil Fill Port or the Remote Engine Oil
Fill Port (both located on the left-hand side of
engine - open hood panel to access).
Cooling System
The cooling system should always be
sufficiently charged with an adequate
mixture of antifreeze and water, regardless of
climate, to maintain broad operating
temperature range. Follow the coolant
manufacturer’s recommendations for your
climate.
NOTE: The cooling system has been
factory-charged with an ethylene
glycol-based antifreeze.
Checking Coolant Level/
Concentration
NOTE: Check coolant level daily.
NOTICE
Ethylene Glycol-based antifreeze and
Propylene Glycol-based antifreeze
should never be mixed.
Engine Oil Fill Port
(Located on the left-hand side of
engine - open hood panel to access)
-Typical View
Remote Engine Oil Fill Port
(Located on the left-hand side of
engine - open hood panel to access)
-Typical View
WARNING
Allow engine and radiator to cool before
removing radiator cap. Removing
radiator cap while the engine is hot can
cause coolant to spray out, resulting in
serious injury.
CAUTION
Pressurized cooling system. Remove
cap slowly.