Hagie 204SP, Operator'S Manual, Page: 32 / 127

SECTION 3 –
CAB
3-6
Refer to “Hydrostatic Drive” provided in
the Engine and Drive Systems Section
elsewhere in this manual for further
information.
Depth Command Switches
-
If Equipped
The Depth Command Switches (located
near the front of operator’s station) allow the
operator to adjust the LS System cutting or
pulling height from the operator’s seat.
Refer to the Detasseling Systems Section
elsewhere in this manual for further
information.
Hydrostatic Drive Control
Handle
The Hydrostatic Drive Control Handle
(located on the side console) is used to
control the direction of the machine and the
speed in which it travels. It also controls the
all up/down functions of the lifts.
Refer to “Hydrostatic Drive” provided in
the Engine and Drive Systems Section
elsewhere in this manual for further
information.
Parking Brake Switch
Traction Valve Indicator
(Located on the side console)
-Typical View
Depth Command Switches
(Located near the front of operator’s station)
-Typical View
CAUTION
Do not engage the parking brake while
the machine is moving. Failure to comply
may result in personal injury and
machine damage.
Hydrostatic Drive Control Handle
(Located on the side console)
-Typical View