GW Instek GPM-8310, User Manual

Page: 7 / 251

SAFETY INSTRUCTIONS
7
Safety Guidelines
General Guideline
CAUTION

Make sure that the voltage input level does not
exceed AC600V.

Make sure the current input level does not
exceed 20A.

Do not place any heavy object on the
instrument.

Avoid severe impact or rough handling that can
lead to damaging the instrument.

Do not discharge static electricity to the
instrument.

Use only mating connectors, not bare wires, for
the terminals.

Do not block or obstruct the cooling fan vent
opening.

Do not perform measurement at the source of a
low-voltage installation or at building
installations (Note below).

Do not disassemble the instrument unless you
are qualified as service personnel.

Make sure that the COM terminal to earth is
limited to 600Vpk.

Remove all test leads before disconnecting the
mains power cord from the socket.

If the equipment is used in a manner not
specified by the manufacturer, the protection
provided by the equipment may be impaired.

The device should be placed in a place where
the plug connected to it can be removed easily.