GW Instek GPM-8310, User Manual

Page: 225 / 251

COMMAND OVERVIEW
225
Description
Sets or returns the command type.
Syntax :SYSTem:COMMunicate:COMMand {DEFAULT|USER}
Query Syntax :SYSTem:COMMunicate:COMMand?
Parameter/
Return parameter DEFAULT GPM8310.
USER User-define.
Example :SYSTEM:COMMUNICATE:COMMAND DEFAULT
:SYSTEM:COMMUNICATE:COMMAND?
->:SYSTEM:COMMUNICATE:COMMAND DEFAULT
Note • The SCPI mode is used to determine whether the
*IDN? query returns the “Default” or “User”
identification string.
:SYSTem:COMMunicate:ETHernet:MACaddress
Description
Returns the Ethernet MAC address.
Query Syntax :SYSTem:COMMunicate:ETHernet:MACaddress?
Example :SYSTEM:COMMUNICATE:ETHERNET:MACADDRESS?
-
>:SYSTEM:COMMUNICATE:ETHERNET:MACADDRESS
00:22:24:00:00:00
:SYSTem:FIRMware:DATE
Description
Returns the firmware date.
Query Syntax :SYSTem:FIRMware:DATE?
Return parameter <Date> yyyymmdd
Example :SYSYEM:FIRMWARE:DATE?
->:SYSYEM:FIRMWARE:DATE 20200101
:SYSTem:KEY:BEEPer
Description
Sets or returns the keyclick beeper state.
Query
Query
Set
Query