Installation
35 | 76
NOTE:
The valves of the system are operated electrically.
● Water can flow to the drain uncontrollably if there is a power failure during
regeneration.
► If there is a power failure, check your product and shut off the water supply, if
necessary.
The installation room must be provided with a floor drain. If no floor drain is available, an
appropriate safety device has to be installed to prevent water damage. We recommend
using a GENO
®
-STOP (refer to chapter 3.6).
If the softened water is intended for human consumption in the sense of the German
Drinking Water Ordinance, the ambient temperature must not exceed 25 °C. For applications
that are purely technical, the ambient temperature must not exceed 40 °C.
NOTE:
Functional failure of the lifting system if there is a power failure.
● Water damage in case the lifting system fails.
► Secure your water installation against inadvertent water leakage if there is a
power failure.
NOTE:
Functional failure if lifting systems are not resistant to salt water.
● Water damage in case the lifting system fails.
► Use a salt water-resistant lifting system, or our regeneration water feed pump
(refer to chapter 3.6).
