Control unit
28 | 76
4.8.1
Connect the softliQ to Wi-Fi using the myGrünbeck app
In order to be able to configure the water softener using the myGrünbeck app, you must
already have an existing peer-to-peer connection (refer to chapter 4.7).
1.
Open the menu of the myGrünbeck app.
2.
Select Settings.
3.
Choose Wi-Fi configuration.
» You will see a screen with "Wi-Fi network status" and "Access point network
status".
» Under "Access point network status", you will see the SSID, IP address and status
of an existing peer-to-peer connection.
If there is no connection, no information will be displayed under "Wi-Fi
network status".
4.
Activate Search for networks.
» Available networks are displayed.
5.
Select your network.
6.
Enter the password of your network.
7.
Confirm the entry.
» If the Wi-Fi connection was established successfully, the Wi-Fi symbol ( ) will
appear in the top left-hand corner of the display.
4.8.2
Connect the softliQ to the Wi-Fi network by using the internal website
NOTE:
Access to the internal website is not possible if an unsuitable browser is used and if
JavaScript is not activated.
● You will not be able to configure your product using the internal website or read
out data.
► Install a current version of Internet Explorer (IE10 or higher) and activate
JavaScript.
You must already have a peer-to-peer connection so that the water softener can be
configured using the internal webpage (refer to chapter 4.7).
You can find the IP address of the internal webpage here:
Settings>Configure WLAN>App network status
