Control unit
25 | 76
Menu items
Settings/remarks
Inputs and
outputs
Voltage-free
contact function
Regeneration water delivery pump (factory-setting)
Contact closed during the regeneration steps of first
filtrate, salting, slow rinse and backwash.
This setting must be made in connection with the
regeneration water feed pump available as an
accessory (refer to chapter 3.6).
Regeneration message
Contact closed during the entire regeneration.
Configuration of
fault signal
contact
N. C. (factory-setting)
Contact closed if mains voltage is applied and there
is no malfunction.
N. O.
Contact closed in the event of a malfunction.
Programmable
output function
Release of regeneration (factory-setting)
Start of a complete regeneration if the contact at the
programmable input closes.
Regeneration lock
The regeneration lock is active as long as the
contact at the programmable input is closed;
manually released and automatic regenerations
after a power failure take priority.
Fault message forwarding
When the contact opens, a text stored using the
myGrünbeck app is sent as an e-mail.
If (in conjunction with the function
voltage-free
contact>forwarding of error messages)
additional devices are connected, the text stored for
sending e-mails can be modified in the myGrünbeck
app accordingly.
4.6
"myGrünbeck" app
1.
You may find the "myGrünbeck" app in Google Play, the App Store or another
marketplace.
2.
Install the myGrünbeck app.
The myGrünbeck app supports IOS from version 8.0 onwards and Android
starting from version 4.4. Refer to the instructions of your mobile device for
more detailed information about installing an app.
