Reverse osmosis system
AVRO 125 TS/TL
Order no. 185 752 945-inter Edited by: nkes-mrie G:\BA-752945-INTER_185_AVRO_125.DOCX
6
3 | General safety information
3.1 Symbols and notes
Important information in this operation manual is emphasised
by symbols. Please pay particular attention to this information to
ensure the hazard-free, safe and efficient handling of the system.
Danger!
Failure to adhere to this information will cause serious or
life-threatening injuries, extreme damage to property or inadmissible
contamination of the drinking water.
Warning!
Failure to adhere to this information can cause injuries,
damage to property or contamination of the drinking water.
Caution!
Failure to adhere to this information can result in damage
to the system or other objects.
Note:
This symbol emphasises information and tips that make your
work easier.
Tasks with this symbol are only allowed to be performed by
Grünbeck's technical service/authorised service company or by
persons expressly authorised by Grünbeck.
Tasks with this symbol are only allowed to be performed by trained
and qualified electrical experts according to the VDE guidelines or
according to the guidelines of a similar local institution.
Tasks with this symbol are only allowed to be performed by water
suppliers or approved installation companies. In Germany, the
installation company must be registered in an installation directory of
a water supplier as per §12(2) AVBWasserV (German Ordinance on
General Conditions for the Supply of Water).
3.2 Operating
personnel
Only allow persons who have read and understood this operation
manual to work with the system. The safety guidelines are to be
strictly adhered to.
3.3 Intended use
The system is only allowed to be used for the purpose outlined in the
product description (chapter C). The guidelines in this operation
manual as well as the applicable local guidelines concerning the
drinking water protection, accident prevention and occupational safety
must be adhered to.
In addition, appropriate application also implies that the system
is only allowed to be operated when it is in proper working order.
Any malfunctions must be repaired at once.
