Alarm
Fav
Skywarn
EXPERT BELOW
Modulation
Atten
Delay
Delay Time
Digital AGC
Supertrack
AudioBoost
Hit Count
None, Chirp, Hi-Lo, Alert,
Ring, 2-Chirp, Fast Hi-Lo,
DTMF#
Sets the Audible Alarm for the CONV object. When
an Audible Alarm is selected, the selected alarm will
play at the beginning of each transmission on the
CONV object, or anytime the scanner stops for
activity on the CONV object while scanning.
On or Off
When On, the CONV object is a member of the
Favorites Scan List.
On or Off
When On, the CONV object is a member of the
Skywarn Scan List.
AM, FM, NFM, AU
Modulation setting for the CONV channel. In most
cases AU will work fine. Use AM to override and
force AM modulation, FM to force FM modulation,
NFM to force narrow FM modulation.
On or Off
When on, applies 20 dB of attenuation to all
transmissions on the CONV channel. Useful in
areas where interference from nearby strong
signals is present.
On or Off
Controls whether a Delay is used to wait for reply
traffic after a transmission on the CONV channel.
1-200
Sets the amount of time (in 100 millisecond
intervals) for the wait for reply delay if Delay is On,
e.g., 20=2 seconds.
On or Off
Controls Digital AGC function for the CONV
channel
On or Off
Alternative DSP decoding algorithm. May help
reception on some systems.
On or Off
Applies a 6 dB boost to audio levels when the
object is active
Numeric value
Increments each time a transmission is received on
the SWPR object. Global “Hit Counts” must be set
to ON. Press the
Dflt
softkey to reset to 0.
0716
User Manual
Page 102
