GRE 0716 Owner'S Manual Download

Page: 73 / 134

0: 33.4-46.5 MHz

VHF Low Band

1: 151-170 MHz

VHF High Band

2: 453-467 MHz

UHF Band

3: 764-806 MHz

700 MHz Band

4: 851-869 MHz

800 MHz Band

Using dedicated TUNE mode

Your scanners dedicated TUNE mode provides you with the
ability to quickly enter any frequency and monitor that frequency
for transmissions, or search up or down from that frequency for
activity.

To enter TUNE mode, press the

TUNE

key on the keypad. The

scanner displays the TUNE screen.

By default, TUNE mode is paused when ﬁrst activated. Press

PAUSE

to begin searching from the current frequency.

Press the

keys on the 5-way pushbutton pad to change

the search direction.

Press the

FrL/O

softkey to add a found frequency to the lockout

list.

Press the

MODE

softkey to change the receive mode (AM, FM,

NFM) from the default for the current frequency range (au).

0716

User Manual

Page 73

Summary of Contents for 0716







































































































































Search results

Summary of Contents for 0716

Reviews:

Related manuals for 0716

Brands by name

Popular brands

GRE 0716, Owner'S Manual

Search results

Summary of Contents for 0716

Reviews:

Related manuals for 0716

Brands by name

Popular brands