GRE 0716 Owner'S Manual Download Page 29 | Manualshive

Page: 29 / 134

background image

which makes it possible to mount the radio on top of any ﬂat
surface in your vehicle.

Your

0716

is also designed to ﬁt into a DIN-E compatible

sleeve, which makes it easy to mount the radio in an existing
radio or CD player dashboard opening. An optional DIN-E
installation kit can be purchased from GRE at :

http://www.greamerica.com

.

NOTE:

In certain cases, installation of mobile communications electronics in
modern automobiles requires specialized tools, training, and
experience. If in doubt, seek assistance from a local car audio
electronics installation shop, or a local two-way radio dealer.

Select a mounting location that does not interfere with visibility
while driving. Use caution not to select a location that may
interfere with the deployment of your vehicles air bags. It is
extremely important not to mount this or any other equipment in
locations where deployment of the air bags may cause the
equipment to be propelled towards the vehicles passengers. If
necessary, seek advice from your automotive dealer or service
shop.

Use the mounting bracket as a template to mark the locations for
the two mounting screws.

At the marked locations, drill holes that are slightly smaller than
the screws. Use caution not to damage wiring or components
that are located behind your drilling surface.

Using the provided screws and lock washers, attach the
mounting bracket to your vehicle.

Attach the two self-adhesive rubber washers to the inside of the
mounting bracket sides, over the holes that are used when
attaching the bracket to the scanners side holes. The rubber
washers help protect the scanners case from scratches.

Slide the scanner into the mounting bracket assembly, and use
the two provided knurled knobs to secure the scanner within the
mounting bracket.

Connect the supplied DC power cable to a power source in your
vehicle as follows:

0716

User Manual

Page 29

«
...
27
28
29
30
31
...
»

Summary of Contents for 0716







































































































































Reviews:

No comments

Related manuals for 0716

Brand: HOKUYO AUTOMATIC Pages: 155

Brand: Worth Data Pages: 1

Brand: Radio Shack Pages: 32

Brand: Radio Shack Pages: 56

Brand: Hasselblad Pages: 2

Brand: Xerox Pages: 88

Brand: UMAX Technologies Pages: 120

Brand: BulletScan Pages: 80

Brand: Canon Pages: 31

Brand: Canon Pages: 6

Brand: Ricoh Pages: 60

Brand: Epson Pages: 122

Brand: Epson Pages: 120

Brand: Epson Pages: 81

Expression 1600

Brand: Epson Pages: 154

Perfection 640U Series

Brand: Epson Pages: 53

Perfection 2450 Photo

Brand: Epson Pages: 24

Expression 1600

Brand: Epson Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands