Saving Main Memory To A V-Scanner Folder
To save the current contents of your scanners main memory to a
V-Scanner folder, press
FUNC
, then
PGM
to enter V-Scanner
mode, then press the
Stor
softkey. Use the
keys on the 5-
way pushbutton pad to scroll to the desired V-Scanner folder,
then press the
Stor
softkey.
If the selected V-Scanner folder already contains data, you will
be asked if you wish to overwrite the existing data with new data
from your current version of main memory. Press the
YES
softkey
to proceed, or the
NO
softkey to cancel. If you decide the
overwrite existing data, or if the selected V-Scanner folder is
already empty, the scanner will prompt you to enter a name for
the stored V-Scanner. The scanner uses the text from Line 4 of
the Welcome Screen as a default name if the folder is empty, or
the current name if the folder contains data. You can provide
your own text here without overwriting the Line 4 Welcome
Screen text. Use the standard text entry method to type the
name you wish to use, then press the
OK
softkey. The scanner
will write the contents of main memory to the V-Scanner folder.
This will take approximately four seconds to complete.
Loading A Stored V-Scanner Folder To Main Memory
To load the contents of a previously saved V-Scanner folder into
your scanners main memory, press
FUNC
, then
PGM
to enter V-
Scanner mode, then press the
Load
softkey. Use the
keys
on the 5-way pushbutton pad to scroll to the desired V-Scanner
folder, then press the
Load
softkey. The scanner will ask you to
confirm that you wish to overwrite the current contents of main
memory. Press the
YES
softkey to proceed, or the
NO
softkey to
abort. The data transfer takes approximately 4 seconds to
complete.
0716
User Manual
Page 87
