GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Keine Haftung für Druckfehler. Technische Änderungen vorbehalten! Liability for printing errors excluded. We reserve the right to introduce modifications. Sous réserve de modifications!
Nous ne sommes pas responsables d’éventuelles erreurs d’impression!
#0060946
08/2009
9
Operating instructions for the model boat LIFE AT THE EXTREME, Order No.: 2131
Brief description of the model
•
Kit containing ready-made components (ARTR)
•
Quick to assemble; no parts have to be trimmed or adjusted
•
GRP hull, already painted
•
Rig consisting of black anodised aluminium profiles
•
Ballast weight already fitted in keel
•
Printed
sails
•
Model supplied complete except for RC components and batteries
•
The model can be completed, ready to sail, in one weekend
•
Light-wind sailing boat: up to wind strength 3
•
Set contents: hull, hatch covers, keel, supplementary keels, rudder system (everything pre-painted),
powerful sailwinch, rudder servo, receiver, transmitter, battery box and switch, injection-moulded plastic
and pressure-cast zinc fittings, aluminium boatstand, small items.
Specification
Overall length approx.
950 mm
Beam approx.
200 mm
Overall height approx.
1550 mm
All-up weight approx.
3.05 kg
Overall sail area approx.
4100 cm²
Manufacturer’s declaration from Graupner GmbH & Co. KG
Content of the manufacturer’s declaration:
If
material defects or manufacturing faults should arise in a product distributed by us in the Federal Republic of
Germany and purchased by a consumer (§ 13 BGB), we, Graupner GmbH & Co. KG, D-73230 Kirchheim/Teck,
Germany, acknowledge the obligation to correct those defects within the limitations described below.
The consumer is not entitled to exploit this manufacturer’s declaration if the failure in the usability of the product
is due to natural wear, use under competition conditions, incompetent or improper use (including incorrect
installation) or external influences.
This manufacturer’s declaration does not affect the consumer’s legal or contractual rights regarding defects
arising from the purchase contract between the consumer and the vendor (dealer).
Extent of the guarantee
If a claim is made under guarantee, we undertake at our discretion to repair or replace the defective goods. We
will not consider supplementary claims, especially for reimbursement of costs relating to the defect (e.g.
installation / removal costs) and compensation for consequent damages unless they are allowed by statute.
This does not affect claims based on legal regulations, especially according to product liability law.
Guarantee requirements
The purchaser is required to make the guarantee claim in writing, and must enclose original proof of purchase
(e.g. invoice, receipt, delivery note) and this guarantee card. He must send the defective goods to us at his own
cost, using the following address:
Gliders
Brunel Drive, Newark, Nottinghamshire, NG242EG
The purchaser should state the material defect or manufacturing fault, or the symptoms of the fault, in as
accurate a manner as possible, so that we can check if our guarantee obligation is applicable.
The goods are transported from the consumer to us and from us to the consumer at the risk of the consumer.
