50
XCU UXF Fiber Series XF Transmission Fiber Base Station User’s Guide (v1.3)
Chapter 4 - Media Network configuration
AES67 Intercom Out
Enabled
— selects whether the AES67 intercom output is included in the Media Network
stream and to which port the stream is sent:
Port A
: AES67 intercom is routed to Port A (default setting).
Port A+B
: AES67 intercom is routed to both Port A and B to establish a redundant
network connection. Refer to
for more information about IP
Redundancy.
Off
: AES67 intercom is NOT inserted into the Media Network stream (this is also indicated
with the indication
off
in front of Stream 1).
Channels
— Number of audio channels that is inserted into AES67 intercom output. Can be
2,4,6, 8 or 16 channels.
Packet Time
— Selects packet time of the AES67 intercom output audio packets.
Port A output
Dest. IP address
— the destination IP address for Port A to which AES67 intercom output is
sent.
Dest. Port
— the destination port number for Port A for AES67 intercom output.
Port B output
☞
Note
☞
Note
Port B is only used when redundant operation is enabled.
Dest. IP address
— the destination IP address for port B to which AES67 intercom output is
sent.
Dest. Port
— the destination port number for Port B for AES67 intercom output.
AES67 Intercom In
Present
— indicates whether AES67 intercom input is present on the Media Network.
Multicast
— Yes or No. Select whether you want to use multicast or not.
Multicast IP
— the receiving multicast IP address, when Multicast =
Yes
.
Channels
— Number of audio channels that is inserted into AES67 intercom input. Can be
2,4,6, 8 or 16 channels.
Buffer Size
— Selects buffer size for AES67 intercom input. Can be 0.33 ms, 0.67 ms, 1 ms, 2
ms, 3 ms, 4 ms, 8 ms or 15 ms.
Tip
✎
Check the ‘Apply settings to all camera systems’ box and press OK to apply the (changed)
settings in this window to all camera systems (where applicable).
