XCU UXF Fiber Series XF Transmission Fiber Base Station User’s Guide (v1.3)
65
Chapter 6 - XCU menu reference
6.3 Audio/Intercom menu
Menu item
Settings
Default
Level
Description
Audio
Audio1 Level
0dB, 6dB
6dB
User 1
Selects studio attenuation level for Audio input 1
Audio2 Level
0dB, 6dB
6dB
User 1
Selects studio attenuation level for Audio input 2.
Intercom
Input Source
Analog, Ext1,
AES67
Analog
User 1
Selects source for intercom Eng and Prod channels:
Analog = from intercom subD-connector at
backpanel of XCU (Cradle);
Ext1 = from embedded SDI audio of external video
input 1 (EXT1)
AES67 = from AES67 intercom stream of the Media
Network.
Program Source
Intercom, Audio
Intercom
User 1
Selects source for intercom Prog channel:
Intercom = from intercom connector at back panel of
XCU (cradle);
Audio = from embedded audio.
(In case of AES67 use program input source from
audio or intercom incoming stream)
Isolate
Isolate
Isolate, System
System
User 1
Isolate = disconnects Program and Production
intercom channels from camera head;
System = isolate is off
Eng
Wire Mode
4wire, 2wire
4wire
User 1
Selects wiring mode for Engineering (Eng) intercom
channel.
Volt/Cur drive
4wire, 2wire
4wire
Service
<Advanced settings>
2/4 wire
4wire, 2wire
4wire
Service
<Advanced settings>
Level
0dB, 6dB
6dB
User 1
Selects intercom channel attenuation (only available
in 4wire mode, in 2wire mode level is always 0 dB).
Side Tone
0..99
50
User 1
Sets side tone (feedback) volume level.
Prod
Wire Mode
4wire, 2wire
4wire
User 1
Selects wiring mode for Production (Prod) intercom
channel.
Volt/Cur drive
4wire, 2wire
4wire
Service
<Advanced settings>
2/4 wire
4wire, 2wire
4wire
Service
<Advanced settings>
Level
0dB, 6dB
6dB
User 1
Selects intercom channel attenuation (only available
in 4wire mode, in 2wire mode level is always 0 dB).
Side Tone
0..99
50
User 1
Sets side tone (feedback) volume level.
Prog
Wire Mode
4wire, 2wire
4wire
User 1
Selects wiring mode for Program intercom channel.
Level
0dB, 6dB
6dB
User 1
Selects intercom Program (Prog) channel attenuation
(only available in 4wire mode, in 2wire mode level is
always 0 dB).
