60
XCU UXF Fiber Series XF Transmission Fiber Base Station User’s Guide (v1.3)
Chapter 5 - Operation
Use the up and down buttons next to the display to loop through five different screens of
information: Transmission, Signals, Status, Audio and Intercom:
Communication indicator
This green indicator lights when communication between camera and the XCU is established
and working correctly. A red light indicates a communication error.
Transmission indicator
This indicator lights when a working signal transmission is established between the camera
and XCU. A correct XF Fiber connection is indicated by a yellow light. A red light indicates a
connection error.
Camera Power indicator
A green light means that the connected camera is powered by the XCU and switched on. A
flashing green light indicates that a camera is connected but not switched on. A red light
indicates a power supply error (e.g. a power overload).
Cable indicator
This green indicator lights when a transmission cable is correctly connected between the
camera and XCU. A flashing red light indicates a missing or interrupted transmission cable. A
red light indicates that a cable is connected but there is an error (e.g. a short circuit).
WARNING
When the temperature in the XCU becomes too high, an
EMERGENCY STOP
occurs. This is
indicated by four indicators (Communication, Transmission, Camera Power and Cable) flashing
simultaneously red. Switch off the unit and contact your regional Grass Valley service
representative.
Transmission
42
Cable
Fiber A
Signal
OK
OK
Fiber B
Cable
OK
Signal
OK
Status
42
XCU PID:
XCU Type:
XCU IP
02RSJX
Package:
OK
12NC:
6455
Version:
v03.17
Signals
42
Extern 2:
Extern 1:
Yes
Extern 3:
No
No
TP:
PAL
Reference:
None
Gen Lock:
No
Audio
42
Audio 1
Audio 2
Audio 3
Audio 4
Intercom
42
Cam Mic
Trk Mic
Eng Mic
Prod In
Prog In
XF Fiber
42
2
3
4
5
