XCU UXF Fiber Series XF Transmission Fiber Base Station User’s Guide (v1.3)
29
Chapter 3 - Configuration
3.4 Navigating the menu
The XCU menu is used for configuring the unit. As there are a large number of functions and
setup options available, it may require some time to become familiar with them all. The menu
is available on the Monitoring output or on the XCU front display.
3.4.1 Entering the menu
Use the navigation panel on the XCU UXF Fiber Series or the OCP 400 to access the XCU
menu. The functions of the XCU are grouped into menus and sub-menus. When accessed, the
main menu appears on the monitor outputs:
The main menu screen shows five items and the name of the menu (at the bottom). One or
more item can be hidden but become visible when you scroll down. A cursor shows your
position in the menu. Use the Up and Down buttons to move the cursor up and down.
3.4.2 Finding your way
Use the navigation buttons to move the cursor through the menu items. If a double arrow (>>)
is visible, then pressing the Select button brings you one level lower in the menu system. Only
five items are visible in each menu. Scroll up or down to see more items.
When you first enter a menu (other than the main menu) the cursor is positioned next to the
first item. The TOP and PREVIOUS entries are not immediately visible but are located above
the first item. Use the control to scroll up to them.
•
Select TOP to bring you back to the Main menu.
•
Select PREVIOUS to go back to the menu that you were in before the current one.
Video
Monitoring
Audio/Intercom
Install
Security
Diagnostics
MENU OFF
Root
>>
>>
>>
>>
>>
>>
Cam Conn
Alias
Device ID
Timing
Time/Date
Signalling input
C2IP Network
Media Network
TOP
PREVIOUS
Install
>>
Jim
XCU1
>>
>>
>>
>>
>>
