manualshive.com logo in svg

GRASS VALLEY SIRIUS SCR 1616-12G, Installation And Operation Manual

Share
Download
GRASS VALLEY SIRIUS SCR 1616-12G Installation And Operation Manual Download Page 56

38

Sirius Remote Control Panels

Taking a Salvo

3 Press the desired Source button. That source will be routed to that destination and the 

Source button will illuminate.

+

Note

 

+ ☞

Note

 

Sources for locked Destinations cannot be changed.

Taking a Salvo

Up to eight salvos can be configured on a Sirius router. Each salvo can route any number of 

sources to any number of destinations, including the same source to multiple destinations. 

Crosspoints not included in a salvo remain unchanged. See 

Salvos Configuration

, on 

page 28 to learn how to configure salvos.
Performing a salvo is a two stage process. First you arm the salvo, and then you take the 

salvo.

1 Press the desired Salvo button. The button will blink for five seconds.
2 Press that blinking Salvo button again to take that salvo.

After five seconds, the Salvo button will no longer be armed and will stop blinking. To take 

that salvo you will need to press the Salvo button again to rearm that salvo.

+

Note

 

+ ☞

Note

 

Salvos do not change locked Destinations.

Connectors and Indicators

Fig. 4-1: Sirius Control Panel Connectors and Indicator

Power Connectors

Sirius control panel provides inputs for two power supplies—one included, redundant 

supply optional.

RJ-45 LAN

Ethernet

Connection

Identify LED

PS 1 & PS 2

Power Supply

Connectors

Summary of Contents for SIRIUS SCR 1616-12G














































































Reviews:

No comments

Brands by name

Popular brands

Load more brands