43
Sirius Compact Routers
Installation and User Manual
+
Note
+ ☞
Note
Performing a Sirius CP factory reset clears the configuration. All Salvo, Source and
Destination buttons are enabled after a factory reset.
Procedure
1 Access the Sirius CP via its internal web page.
2 Click on the HOME tab and select one of the four routers.
3 Click on the BUTTONS tab and then click on the Source, Destination, and/or Salvo
buttons you wish to disable. Enabled buttons have a green background color and
disabled buttons have a gray background color.
Fig. 4-6: Sirius SCP2 Configuration with Disabled Buttons
4 Web UI buttons that have been disabled will go blank, and the tally lights of the
disabled physical buttons on the Sirius CP will go off.
Network Screen
The Network screen provides access to standard TCP-IP setup fields and allows you to click
on the System Name field to change it. The MAC address is a fixed machine address
composed of manufacturer identification and product serial numbers.
You can choose DHCP or Static IP with the drop down menu. When Static IP is selected the
fields below are able to be edited. After changing the network type or entering Static IP
information, click the Update Network Settings button to commit your settings.
+
Note
+ ☞
Note
Do not Update Network Settings with 0.0.0.0 values for either IP Address or Netmask. This
will disable the control panel and it will need to be returned to Grass Valley for repair.
Summary of Contents for SIRIUS SCR 1616-12G
Page 2: ...ii Notices ...
Page 24: ...6 Introduction In This Manual ...
Page 40: ...22 Installation Identify Button ...
