manualshive.com logo in svg

GRASS VALLEY SIRIUS SCR 1616-12G, Installation And Operation Manual

Share
Download
GRASS VALLEY SIRIUS SCR 1616-12G Installation And Operation Manual Download Page 63

 45

5

eMini-Setup

Overview

This chapter describes using the eMini-Setup application to initially communicate with and 

configure the Sirius over a direct USB connection. Once configured, the Sirius can be 

accessed via an Ethernet network using a web browser. Subsequently, that device can then 

be reconfigured over that network, using its IP address and built in web server.

+

Note

 

+ ☞

Note

 

The eMini-Setup application is only used to setup selected Ethernet capable AJA devices, 

and cannot be used to connect to or setup other AJA Mini-Converters.

The general procedure is:

1 Acquire eMini-Setup from the AJA website and install the eMini-Setup application onto 

a computer.

2 Connect the Sirius to that computer’s USB port.
3 Launch the eMini-Setup application.
4 Go to the Network tab where the IP address settings are displayed. You can use the 

existing DHCP assigned IP address, or it can be changed manually.

Acquiring eMini-Setup

AJA’s eMini-Setup application is available for download from the AJA website.
To download the latest eMini-Setup package, which includes the eMini-Setup application 

and documentation:

1 Go to:

https://www.aja.com/family/software#eminisetup

2 Click the link corresponding to the version you want to download for Mac or Windows.

AJA Documentation

Included with the eMini-Setup download is the AJA device's documentation, which can be 

accessed from the eMini-Setup UI via the Help/Manual drop-down menu. This manual 

includes eMini-Setup information.
Documentation can also be accessed directly from the Mac eMini-Setup installer in the 

Documentation folder.

Summary of Contents for SIRIUS SCR 1616-12G














































































Reviews:

No comments

Brands by name

Popular brands

Load more brands